This release will be sold in two batches of ten (10). This is to allow us to source cores in a sustainable way for those ordering complete lights. 

ETA on delivery is 4-9 weeks (depending on region, and lens/PNP options)

What's Included?:

- One set of lenses to replace the factory lenses on the SG5 Forester Tail Lights (Red lens)
- For those ordering the complete PNP sets, they will include LED bulbs for brakes, turn signals, and reverse. 

Special Notes:

These are OEM reproduction replacements of the factory lenses in clear material. 

Due to the replacement casting material, applying a UV resistant clear coat is recommended to prevent long-term yellowing from UV degradation/exposure.

For the center piece, it is recommended to paint the inside silver to match the overall color of the outside pieces as well. 

Custom Orders:

Custom orders/colors are not available at this time, but will be available soon.

Reference Material:

How to remove the factory lens tutorial here

Installation instructions are easy - 

1. Remove perimeter screws and single screw under the bulb cover.

2. Heat up lights in an oven to 180-200F (heatgun w/ slow application also works)

3. Using flathead screwdriver (or other pry tool), slowly pry original lens out

4. Reheat light to 200F to soften butyl, add additional butyl sealer (3M window weld, etc, recommended to ensure no leakage), if desired

5. install replacement lens, reinsert screws. 

Contact

For any questions and concerns about any products, please feel free to contact us or drop us a line on Facebook. Thank you!

Email: sales@illumaesthetic.com