NOTE - Photos are for reference only. Final product will be using new molds that will have a much cleaner finished product.
ETA on delivery is 3-4 weeks
- Pair (2) of lenses to replace the factory lenses on the OEM Chuki 240SX tails
- Tail lights are NOT included!
These are OEM reproduction replacements of the factory lenses in clear material.
Due to the replacement casting material, applying a UV resistant clear coat is recommended to prevent long-term yellowing from UV degradation/exposure.
For the center piece, it is recommended to paint the inside silver to match the overall color of the outside pieces as well.
Custom orders/colors are not available at this time, but will be available soon.
How to remove the factory lens tutorial here
Installation instructions are easy -
1. Remove perimeter screws and single screw under the bulb cover.
2. Heat up lights in an oven to 180-200F (heatgun w/ slow application also works)
3. Using flathead screwdriver (or other pry tool), slowly pry original lens out
4. Reheat light to 200F to soften butyl, add additional butyl sealer (3M window weld, etc, recommended to ensure no leakage), if desired
5. install replacement lens, reinsert screws.