Nissan Skyline R33 Coupe Clear DIY Tail Light Lenses
Nissan Skyline R33 Coupe Clear DIY Tail Light Lenses
Nissan Skyline R33 Coupe Clear DIY Tail Light Lenses
Nissan Skyline R33 Coupe Clear DIY Tail Light Lenses
Nissan Skyline R33 Coupe Clear DIY Tail Light Lenses
Nissan Skyline R33 Coupe Clear DIY Tail Light Lenses
Nissan Skyline R33 Coupe Clear DIY Tail Light Lenses
Nissan Skyline R33 Coupe Clear DIY Tail Light Lenses
Nissan Skyline R33 Coupe Clear DIY Tail Light Lenses
Nissan Skyline R33 Coupe Clear DIY Tail Light Lenses

Nissan Skyline R33 Coupe Clear DIY Tail Light Lenses

Regular price
$275.00
Sale price
$275.00
Unit price
per 

As part of our 2022 infrastructure upgrade clear lenses will not be available until early 2022. 

What's Included?:

- One full set of circular lenses (2, turn signal not included) to replace the factory lenses on the OEM R32 Coupe Tail Lights
Tail lights are NOT included!

Special Notes:

These are OEM reproduction replacements of the factory lenses in clear material. 1157 red LED bulbs are needed for proper function, and to maintain red lighting functionality.

Due to the replacement casting material, applying a UV resistant clear coat is recommended to prevent long-term yellowing from UV degradation/exposure.

Please note that while this method does its absolute best to match OEM-level quality, some minor finishing/buff/polishing may be needed to get OEM-like shine. 

Custom Orders:

Custom orders/colors are available, but please email us before ordering.

Reference Material:

How to remove the factory lens tutorial here

Installation instructions are easy - 

Pre-check: Lenses are marked for the side they belong to like OEM

1. Heat up lights in an oven to 180-200F (heatgun w/ slow application also works)

2. Using flathead screwdriver (or other pry tool), slowly pry original lens out

3. Reheat light to 200F to soften butyl, add additional butyl sealer (3M window weld, etc, recommended to ensure no leakage), if desired

4. install replacement lens, reinsert screws. 

Scratch and Dent: 

Scratch and dent products are products that have minor defects that prevent them going as a normal sale, but not so bad that they are no longer usable. They can include, but are not limited to: debris in casting, air bubbles, surface finish, and minor scratches and divots that has been filled in but needs wet sand and polish. Please email us if you have any specific questions regarding S&D items, and do not buy them if you are picky about finish quality. No refunds are given for S&D items, no exceptions.

Contact

For any questions and concerns about any products, please feel free to contact us or drop us a line on Facebook. Thank you!

Email: sales@illumaesthetic.com